f7 e1
Call a Pro
Whirlpool · Dishwashers
Heater stuck on / heating element error
Quick Answer
Error code F7 E1 on your Whirlpool Dishwashers means: Heater stuck on / heating element error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Immediately disconnect power to prevent overheating.
2
Step 2: Allow the dishwasher to cool completely.
3
Step 3: Check the heating element for continuity with a multimeter.
4
Step 4: Inspect the main control board for a stuck relay.
5
Step 5: Replace the main control board if the heater relay is shorted.
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Main control board
Heating element
Related Error Codes