f8 e4
Moderate
Whirlpool · Dishwashers
Water detected in base pan / leak detected
Quick Answer
Error code F8 E4 on your Whirlpool Dishwashers means: Water detected in base pan / leak detected. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Turn off the water supply immediately.
2
Step 2: Press Cancel once to silence the alarm tone.
3
Step 3: Pull the dishwasher out and inspect the base pan for water.
4
Step 4: Check all internal hose connections and the tub seal.
5
Step 5: If recently installed, verify all connection points and rubber washers are properly seated.
6
Step 6: Dry the base pan and fix any leaks before restarting.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Tub seal
Hose clamps
Water inlet connection
Related Error Codes