i70
Moderate
AEG · Dishwashers
NTC temperature sensor fault
Quick Answer
Error code i70 on your AEG Dishwashers means: NTC temperature sensor fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Locate the NTC sensor (usually near the sump)
2
Test with a multimeter - resistance should change with temperature
3
Check wiring connections
4
Replace the NTC sensor
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
NTC temperature sensor
Related Error Codes