if0
Moderate
AEG · Dishwashers
Reset needed and water supply check required
Quick Answer
Error code iF0 on your AEG Dishwashers means: Reset needed and water supply check required. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Turn off the dishwasher
2
Check and clean the filters
3
Check the water supply and drain hoses
4
Ensure hoses are installed properly without kinks
5
Restart the dishwasher
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water filter
Inlet valve
Related Error Codes