f01
Moderate
GE · Dryers
Inlet thermistor defective (CleanSpeak models)
Quick Answer
Error code F01 on your GE Dryers means: Inlet thermistor defective (CleanSpeak models). This is usually fixable — see the step-by-step guide below.
Affected Models
Specific models affected
Likely Causes
How to Fix It
1
Step 1: Unplug the dryer.
2
Step 2: Locate the inlet thermistor on the inlet duct at the back of the dryer.
3
Step 3: Measure resistance using a volt/ohm meter.
4
Step 4: Replace the inlet thermistor if resistance is not 47.6K-52.4K ohms at 77°F.
5
Step 5: Check wiring between thermistor and electronic control.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Inlet thermistor
Related Error Codes