e1
Moderate
Goodman · HVAC Systems (AC, Furnaces & Heat Pumps)
Compressor Protection Activated
Quick Answer
Error code E1 on your Goodman HVAC Systems (AC, Furnaces & Heat Pumps) means: Compressor Protection Activated. This is usually fixable — see the step-by-step guide below.
Likely Causes
How to Fix It
1
Allow the compressor to cool for 30 minutes with power off before attempting restart
2
Measure compressor amperage with a clamp meter and compare to the nameplate RLA
3
Check the condenser coil for dirt and clean if necessary
4
Verify the condenser fan motor is operating properly
5
A licensed HVAC technician should check refrigerant charge and compressor condition
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Compressor (if failed)
Run capacitor
Hard start kit
Contactor
Related Error Codes