f0e1
Easy Fix
Kenmore · Washing Machines
Fill Timeout - Washer Not Filling with Water
Quick Answer
Error code F0E1 on your Kenmore Washing Machines means: Fill Timeout - Washer Not Filling with Water. This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Check that both the hot and cold water supply faucets behind the washer are fully open
2
Turn off the supply faucets and disconnect the fill hoses from the back of the washer to clean the inlet screen filters
3
Test household water pressure at a nearby faucet using a pressure gauge; minimum 20 PSI is required
4
Use a multimeter to test each inlet valve solenoid coil for continuity (expect 500-1500 ohms)
5
Replace the water inlet valve assembly if either solenoid fails the test
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Kenmore water inlet valve (part #W11165546)
Inlet hose screen filters
Fill hoses (if kinked or damaged)
Related Error Codes