9e
Moderate
LG · Dishwashers
Diverter position error - the dishwasher cannot determine the position of the diverter valve
Quick Answer
Error code 9E on your LG Dishwashers means: Diverter position error - the dishwasher cannot determine the position of the diverter valve. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Turn off the dishwasher and disconnect power at the circuit breaker
2
Access the diverter assembly at the bottom of the dishwasher
3
Check for any debris or obstructions preventing the diverter from moving freely
4
Inspect wiring connections between the diverter motor and control board
5
Test the diverter motor and position sensor with a multimeter
6
Replace the diverter motor if it has failed
7
If the motor tests good, the control board may need replacement
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Diverter motor
Position sensor
Control board
Related Error Codes