ne
Moderate
LG · Dishwashers
Vario motor/diverter motor error - the diverter motor that controls spray arm direction and intensity is not operating normally
Quick Answer
Error code nE on your LG Dishwashers means: Vario motor/diverter motor error - the diverter motor that controls spray arm direction and intensity is not operating normally. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Open the dishwasher and reorganize dishes to ensure nothing is touching or blocking the spray arms or impeller
2
Restart the dishwasher and run a new cycle
3
If the error persists, turn off the dishwasher and disconnect power
4
Remove the bottom kick plate and locate the diverter motor at the bottom of the dishwasher
5
Check for foreign objects jammed in the diverter impeller and remove them
6
Disconnect the diverter motor wires and test resistance with a multimeter; reading should be between 2,700-4,000 ohms
7
If the resistance is out of range, replace the diverter motor
8
Check the micro switch for proper operation; replace if faulty
9
If all components test good, the control board may need replacement
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Diverter motor (Vario motor)
Micro switch
Control board
Related Error Codes