HomeBrandsMaytagWashing Machinesf0 e1
M
f0 e1
Easy Fix
Maytag · Washing Machines
Fill Timeout Error
Quick Answer
Error code F0 E1 on your Maytag Washing Machines means: Fill Timeout Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MHW5630HWMHW6630HWMVW6200KWMVW7232HWMVWB765FW
Likely Causes
  1. Water supply faucets behind the washer are not fully turned on
  2. Clogged inlet hose filter screens blocking water flow
  3. Defective water inlet valve solenoid not opening when energized
  4. Household water pressure too low, below the required 20 PSI minimum
How to Fix It
1
Check that both hot and cold water faucets behind the washer are fully open
2
Disconnect the inlet hoses from the back of the washer and clean the filter screens inside the inlet valve ports
3
Verify adequate water pressure by testing the flow from a nearby faucet
4
Test the water inlet valve solenoids with a multimeter for continuity and replace the valve if a solenoid is open
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Water inlet valve (W10853723)
Inlet hose filter screens
Related Error Codes
F0 E2F0 E5F1 E1F1 E2F3 E1
Video Guides
Loading video guides…
Search more on YouTube →