f1 e2
Moderate
Maytag · Washing Machines
Motor Control Unit Failure
Quick Answer
Error code F1 E2 on your Maytag Washing Machines means: Motor Control Unit Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Unplug the washer for 5 minutes to allow the motor control unit to cool and reset
2
Check wiring connections between the main control board and motor control unit
3
Inspect the motor control board for burned components or melted connector pins
4
Verify proper 120V supply voltage at the outlet with a multimeter
5
Replace the motor control unit if it shows signs of damage or the error persists
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Motor control unit (W10756692)
Wiring harness
Related Error Codes