HomeBrandsMaytagWashing Machinesf1 e1
M
f1 e1
Moderate
Maytag · Washing Machines
Main Control Board Malfunction
Quick Answer
Error code F1 E1 on your Maytag Washing Machines means: Main Control Board Malfunction. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MHW5630HWMHW6630HWMVW6200KWMVW7232HWMVWB765FW
Likely Causes
  1. Electrical power surge or spike has damaged the main control board
  2. Corroded or cracked solder joints on the control board
  3. Control board relay or processor failure
  4. Loose wiring harness connector at the main control board
How to Fix It
1
Unplug the washer from the electrical outlet and wait 5 minutes before restoring power to reset the board
2
If the error returns, access the main control board and inspect it for burned or discolored components
3
Check all wiring harness connectors at the main control board for secure and clean contact
4
Replace the main control board if visual damage is found or the error cannot be cleared by reset
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (W11170645)
Wire harness connectors
Related Error Codes
F0 E1F0 E2F0 E5F1 E2F3 E1
Video Guides
Loading video guides…
Search more on YouTube →