ce
Moderate
Frigidaire · Dishwashers
Configuration Error - Control Board Configuration Mismatch
Quick Answer
Error code CE on your Frigidaire Dishwashers means: Configuration Error - Control Board Configuration Mismatch. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Disconnect power for 10 minutes and restore to attempt a configuration reset
2
If the error persists, verify the control board part number matches the correct part for your specific model
3
Some boards may require a configuration step during installation using a specific button sequence described in the installation guide
4
If the board is the correct part but the error remains, the EEPROM may be corrupted and the board needs replacement
5
Install the correct control board and follow the model-specific configuration procedure
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (correct model-specific part number)
Installation guide for configuration procedure
Related Error Codes