HomeBrandsFrigidaireDishwashersi50
F
i50
Moderate
Frigidaire · Dishwashers
Drain Pump Motor Failure
Quick Answer
Error code i50 on your Frigidaire Dishwashers means: Drain Pump Motor Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
FDPC4314ASFDSH4501ASFFCD2413USFGID2468UFGDSH4715AF
Likely Causes
  1. Drain pump motor has burned out and will not operate
  2. Pump impeller is broken and the motor spins freely without pumping water
  3. Electrical connection to the drain pump has failed (burned wire or connector)
  4. Control board is not sending power to the pump circuit
How to Fix It
1
Listen for the drain pump during the drain portion of a cycle; silence indicates the pump is not running
2
Disconnect power and access the drain pump (typically at the bottom of the sump assembly)
3
Test the drain pump motor for continuity with a multimeter (should read 5-30 ohms depending on model)
4
Check the wiring connection and connector to the pump for burn marks or corrosion
5
Replace the drain pump assembly if the motor tests open or the impeller is broken
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Drain pump assembly (model-specific)
Wire connector repair kit
Related Error Codes
i10i20i40i30i60
Video Guides
Loading video guides…
Search more on YouTube →