i10
Easy Fix
Frigidaire · Dishwashers
Low Water Level - Dishwasher Not Filling with Enough Water
Quick Answer
Error code i10 on your Frigidaire Dishwashers means: Low Water Level - Dishwasher Not Filling with Enough Water. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check that the water supply shutoff valve under the sink is fully open
2
Disconnect the water supply hose from the dishwasher inlet valve and clean the filter screen at the valve inlet
3
Test the household water pressure at the kitchen faucet using a pressure gauge (must be at least 20 PSI)
4
Test the inlet valve solenoid for continuity with a multimeter (expected 500-1500 ohms)
5
Replace the water inlet valve if it tests open or if water flow is still insufficient after cleaning the screen
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Water inlet valve (model-specific)
Inlet hose filter screen
Water supply hose (if kinked or restricted)
Related Error Codes