i30

Moderate

Frigidaire · Dishwashers

Leak Detected - Water in Base Pan

Quick Answer

Error code i30 on your Frigidaire Dishwashers means: Leak Detected - Water in Base Pan. This is usually fixable — see the step-by-step guide below.

Affected Models

Applies to all models

Likely Causes

A hose connection inside the dishwasher has come loose or developed a crack
The tub gasket or sump seal is worn and allowing water to seep into the base
The door gasket is not sealing properly, allowing water to drip down during the wash cycle
A spray arm is cracked and directing water against the door seal at an incorrect angle

How to Fix It

Disconnect power and water supply to the dishwasher immediately

Remove the kick plate and use towels to soak up any water in the base pan

Inspect the door gasket, all hose connections, the sump seal, and spray arms for signs of leaking

Run a short cycle with the kick plate removed and observe for the leak source

Repair the leak by tightening connections, replacing gaskets, or replacing the cracked component

Pro Tip

This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.

Parts You May Need

Door gasket (model-specific)

Sump seal kit

Hose clamps

Spray arm (if cracked)

Related Error Codes

Video Guides

Loading video guides…