HomeBrandsGERefrigeratorsec
G
ec
Moderate
GE · Refrigerators
Evaporator Coil Temperature Sensor Failure
Quick Answer
Error code EC on your GE Refrigerators means: Evaporator Coil Temperature Sensor Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
GFE26JYMFSGFE28GELDSGIE18GSHSSGNE27JYMFSGSS25GSHSSPVD28BYNFSPYE22KYNFS
Likely Causes
  1. Evaporator coil sensor has drifted out of calibration or failed open
  2. Sensor wire has been damaged by ice buildup on the evaporator
  3. Connector at the sensor or control board is corroded
  4. Frost has encased the sensor, giving false readings
How to Fix It
1
Remove the back panel inside the freezer to access the evaporator coils and locate the sensor
2
If heavy frost is present, manually defrost the freezer by unplugging and leaving the doors open for several hours
3
Once accessible, disconnect the sensor and test resistance (approximately 32k ohms at 0 degrees F)
4
Inspect the sensor wire for damage from ice expansion
5
Replace the evaporator sensor if the resistance is out of range or the wire is damaged
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Evaporator temperature sensor (model-specific)
Wire repair kit
Related Error Codes
0000/88CCCIdEFF
Video Guides
Loading video guides…
Search more on YouTube →