HomeBrandsKenmoreWashing Machinesdl
K
dl
Moderate
Kenmore · Washing Machines
Door Lock Error
Quick Answer
Error code dL on your Kenmore Washing Machines means: Door Lock Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
203622130222352261322713241262
Likely Causes
  1. Door lock assembly motor or solenoid has failed
  2. Door is not fully closed before cycle start is pressed
  3. Door lock wiring has an intermittent connection
  4. Control board door lock output circuit is not sending power to the lock
How to Fix It
1
Open the door fully and close it firmly, ensuring the latch clicks into place
2
Disconnect power for 2 minutes and try starting a new cycle
3
If the error continues, access the door lock assembly and test the lock motor/solenoid for continuity
4
Check the wiring from the lock to the control board for damaged or loose connections
5
Replace the door lock assembly if the solenoid or motor does not have continuity
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Kenmore door lock assembly (model-specific)
Wire harness repair kit
Related Error Codes
F0E1F0E2F0E5F1E1F1E2
Video Guides
Loading video guides…
Search more on YouTube →