f3e1
Moderate
Kenmore · Washing Machines
Pressure Switch / Water Level Sensor Fault
Quick Answer
Error code F3E1 on your Kenmore Washing Machines means: Pressure Switch / Water Level Sensor Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Disconnect power and remove the top panel to access the pressure switch and its hose
2
Trace the pressure hose from the switch down to the tub and check for disconnections, kinks, or cracks
3
Remove the hose and blow through it to verify it is clear; clean the air trap at the tub connection
4
Test the pressure switch wiring for continuity from the switch connector to the main control board
5
Replace the pressure switch if the hose is clear and wiring is intact but the error persists
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Kenmore pressure switch/water level sensor (part #W10514214)
Pressure switch hose
Air trap/dome cleaning kit
Related Error Codes