HomeBrandsKenmoreWashing Machinesf5e1
K
f5e1
Moderate
Kenmore · Washing Machines
Door Switch Not Detected
Quick Answer
Error code F5E1 on your Kenmore Washing Machines means: Door Switch Not Detected. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
203622130222352261322713241262
Likely Causes
  1. Door/lid switch assembly has failed and is not sending a signal when the door is closed
  2. Door/lid switch actuator is broken or misaligned
  3. Wiring harness to the door/lid switch has a broken wire, often in the door hinge area from repeated flexing
  4. Main control board door switch input circuit is damaged
How to Fix It
1
Close the door or lid firmly and verify it latches completely
2
Inspect the switch actuator on the door for breakage or wear
3
Use a multimeter to test the door/lid switch for continuity when the door is closed
4
Check the wiring from the switch through the hinge area for any broken or frayed wires
5
Replace the door/lid switch assembly if it does not show proper continuity
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Door/lid switch assembly (model-specific)
Door strike/actuator (if broken)
Related Error Codes
F0E1F0E2F0E5F1E1F1E2
Video Guides
Loading video guides…
Search more on YouTube →