HomeBrandsKenmoreWashing Machinesf7e1
K
f7e1
Moderate
Kenmore · Washing Machines
Motor Speed Sensing Error
Quick Answer
Error code F7E1 on your Kenmore Washing Machines means: Motor Speed Sensing Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
203622130222352261322713241262
Likely Causes
  1. Motor rotor position sensor (RPM sensor) has failed
  2. Excessive load weight is preventing the motor from reaching the commanded speed
  3. Drive belt is broken or slipping (on belt-drive models)
  4. Motor control board is not properly driving the motor
How to Fix It
1
Reduce the load size and restart the cycle to rule out an overloaded drum
2
Check the drive belt (on applicable models) for proper tension, wear, or breakage
3
Access the motor and test the rotor position sensor/tachometer for proper resistance (typically 100-300 ohms)
4
Spin the motor shaft by hand to check for seized bearings or mechanical binding
5
Replace the motor rotor position sensor or motor assembly if the sensor is faulty
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Motor rotor position sensor (model-specific)
Drive belt (if belt-drive model)
Drive motor (if bearings are failed)
Related Error Codes
F0E1F0E2F0E5F1E1F1E2
Video Guides
Loading video guides…
Search more on YouTube →