HomeBrandsKenmoreWashing Machinesf8e1
K
f8e1
Moderate
Kenmore · Washing Machines
Water Supply Error - Low or No Flow
Quick Answer
Error code F8E1 on your Kenmore Washing Machines means: Water Supply Error - Low or No Flow. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
203622130222352261322713241262
Likely Causes
  1. Both water supply faucets are closed or the supply hoses are severely kinked
  2. Inlet valve screens are completely blocked with sediment
  3. Flow meter is not detecting water entering the machine
  4. Water inlet valve is receiving power but failing to open mechanically
How to Fix It
1
Verify both hot and cold water supply faucets are fully open
2
Disconnect the inlet hoses and clean the small mesh filter screens at the inlet valve ports
3
Place the supply hose ends in a bucket and turn on the faucets to verify adequate water flow
4
If water flows from the hoses but the washer still does not fill, test the inlet valve solenoids for continuity
5
Replace the water inlet valve if solenoids test open or the valve does not open when powered
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Kenmore water inlet valve (part #W11165546)
Fill hose screen filters
Stainless steel fill hoses (if damaged)
Related Error Codes
F0E1F0E2F0E5F1E1F1E2
Video Guides
Loading video guides…
Search more on YouTube →