HomeBrandsKenmoreWashing Machinesoe
K
oe
Moderate
Kenmore · Washing Machines
Overflow Error - Water Level Too High
Quick Answer
Error code OE on your Kenmore Washing Machines means: Overflow Error - Water Level Too High. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
203622130222352261322713241262
Likely Causes
  1. Water inlet valve is stuck partially open, allowing water to slowly fill beyond the set level
  2. Pressure switch is not accurately detecting the water level, allowing overfilling
  3. Pressure switch air hose is disconnected or has a hole
  4. Drain siphoning is pulling water back into the tub from the standpipe
How to Fix It
1
Immediately turn off the water supply faucets behind the washer
2
Check the drain hose installation; ensure it has a proper anti-siphon loop or air gap
3
Access the pressure switch hose and inspect it for disconnections, cracks, or blockages
4
Test the water inlet valve by turning off power; if water continues to enter, the valve is stuck and must be replaced
5
Replace the pressure switch if the hose is intact but the sensor is not correctly detecting water level
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Kenmore water inlet valve (part #W11165546)
Pressure switch (part #W10514214)
Pressure switch hose
Anti-siphon clip for drain hose
Related Error Codes
F0E1F0E2F0E5F1E1F1E2
Video Guides
Loading video guides…
Search more on YouTube →