HomeBrandsMaytagDryersf1 e1
M
f1 e1
Moderate
Maytag · Dryers
Main Control Board Failure
Quick Answer
Error code F1 E1 on your Maytag Dryers means: Main Control Board Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MED6230HWMED7230HWMEDC465HWMGD6230HWMGD7230HW
Likely Causes
  1. Power surge or electrical transient has damaged the main electronic control board
  2. Corroded relay contacts or failed transistor on the control board
  3. Moisture or humidity damage to the control board components
  4. Solder joint fatigue on the control board from repeated thermal cycling
How to Fix It
1
Unplug the dryer and wait 5 minutes before restoring power to attempt a control board reset
2
Remove the top or rear panel to access the main control board
3
Inspect the board visually for burn marks, swollen capacitors, cracked solder joints, or corrosion
4
Check all wiring connectors at the control board for firm and clean contact
5
Replace the main control board if visual damage is present or the error returns after a power reset
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (W10174745)
Wiring harness connectors
Related Error Codes
F1 E2F2 E1F3 E1F3 E2F3 E3
Video Guides
Loading video guides…
Search more on YouTube →