HomeBrandsMaytagDryersf2 e1
M
f2 e1
Easy Fix
Maytag · Dryers
Stuck Button on Control Panel
Quick Answer
Error code F2 E1 on your Maytag Dryers means: Stuck Button on Control Panel. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MED6230HWMED7230HWMEDC465HWMGD6230HWMGD7230HW
Likely Causes
  1. A button on the control panel is physically stuck in the pressed position
  2. Liquid, detergent, or fabric softener residue under the control panel membrane
  3. Defective membrane switch overlay causing a false button press
  4. User interface circuit board input malfunction
How to Fix It
1
Press each button on the control panel individually to feel for any that are stuck or do not click back
2
Clean the control panel surface with a damp cloth, paying attention to the edges of each button
3
Unplug the dryer for 2 minutes and restore power to see if the error clears
4
Replace the control panel overlay or user interface board if the stuck button condition persists
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
User interface board (W11310252)
Control panel overlay
Related Error Codes
F1 E1F1 E2F3 E1F3 E2F3 E3
Video Guides
Loading video guides…
Search more on YouTube →