HomeBrandsMaytagWashing Machinesf7 e1
M
f7 e1
Moderate
Maytag · Washing Machines
Motor Speed Sensor Error
Quick Answer
Error code F7 E1 on your Maytag Washing Machines means: Motor Speed Sensor Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MHW5630HWMHW6630HWMVW6200KWMVW7232HWMVWB765FW
Likely Causes
  1. Motor rotor position sensor (hall effect sensor) has failed
  2. Loose or damaged wiring between the speed sensor and the control board
  3. Excessive resistance in the drive system preventing normal motor speed from being achieved
  4. Worn motor bearings causing erratic speed sensor readings
How to Fix It
1
Unplug the washer and check the motor speed sensor wiring connections for looseness or damage
2
Inspect the drive belt (if equipped) for wear, glazing, or slipping
3
Spin the wash basket manually to check for grinding or excessive resistance from worn bearings
4
Test the motor speed sensor resistance with a multimeter per the tech sheet specifications
5
Replace the motor rotor position sensor if it is out of specification
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Motor rotor position sensor (W10183157)
Drive belt (if applicable)
Wire connectors
Related Error Codes
F0 E1F0 E2F0 E5F1 E1F1 E2
Video Guides
Loading video guides…
Search more on YouTube →