HomeBrandsMaytagWashing Machinesf7 e6
M
f7 e6
Moderate
Maytag · Washing Machines
Drive Motor Fault
Quick Answer
Error code F7 E6 on your Maytag Washing Machines means: Drive Motor Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MHW5630HWMHW6630HWMVW6200KWMVW7232HWMVWB765FW
Likely Causes
  1. Drive motor windings have failed resulting in an open or shorted circuit
  2. Motor has overheated from running an overloaded cycle
  3. Failed motor run capacitor
  4. Corroded or loose motor wiring terminals
How to Fix It
1
Unplug the washer and allow the motor to cool for at least 30 minutes
2
Check motor wiring connections for corrosion, heat damage, or looseness at the motor terminals
3
Test the motor windings with a multimeter; each winding pair should read within the specification on the tech data sheet
4
Test the motor run capacitor with a capacitance meter if applicable
5
Replace the drive motor if winding resistance is out of specification or the motor does not start
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Drive motor (W10677719)
Motor run capacitor
Motor mounting hardware
Related Error Codes
F0 E1F0 E2F0 E5F1 E1F1 E2
Video Guides
Loading video guides…
Search more on YouTube →