HomeBrandsMaytagWashing Machinesf8 e1
M
f8 e1
Easy Fix
Maytag · Washing Machines
Water Supply Insufficient
Quick Answer
Error code F8 E1 on your Maytag Washing Machines means: Water Supply Insufficient. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MHW5630HWMHW6630HWMVW6200KWMVW7232HWMVWB765FW
Likely Causes
  1. Water supply valves are closed or only partially open
  2. Inlet hose filter screens are clogged with sediment
  3. Water inlet valve has failed electronically and will not open
  4. Very low household water pressure
  5. Frozen supply lines in unheated laundry areas
How to Fix It
1
Confirm both hot and cold water supply faucets behind the washer are fully open
2
Disconnect the inlet hoses and clean the filter screens at the valve inlet with a small brush
3
Test water pressure at a nearby faucet to ensure it meets the 20 PSI minimum
4
In cold weather, check if the water supply lines may be frozen and thaw carefully if so
5
Test the water inlet valve solenoids with a multimeter and replace the valve if any solenoid fails the continuity test
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Water inlet valve (W10853723)
Inlet hose screen filters
Water supply hoses
Related Error Codes
F0 E1F0 E2F0 E5F1 E1F1 E2
Video Guides
Loading video guides…
Search more on YouTube →