e11
Easy Fix
Electrolux · Washing Machines
Fill Timeout - Water Not Entering Drum
Quick Answer
Error code E11 on your Electrolux Washing Machines means: Fill Timeout - Water Not Entering Drum. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Verify both hot and cold water supply faucets behind the washer are fully open
2
Turn off the water supply, disconnect the inlet hoses from the back of the washer, and clean the small mesh filter screens at the valve inlets
3
Check household water pressure by attaching a pressure gauge to a nearby faucet; the washer requires at least 20 PSI
4
Using a multimeter, test each water inlet valve solenoid coil for continuity (expected resistance 500-1500 ohms)
5
Replace the water inlet valve assembly if either solenoid fails the continuity test
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Electrolux dual water inlet valve (part #137353500)
Inlet hose screen filters
Stainless steel braided fill hoses (if originals are kinked)
Related Error Codes