HomeBrandsElectroluxWashing Machinese38
E
e38
Moderate
Electrolux · Washing Machines
Pressure Sensor Malfunction
Quick Answer
Error code E38 on your Electrolux Washing Machines means: Pressure Sensor Malfunction. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
EFLS627UTTEFLW427UIWELFW7537AWELFW7637ATELTW7637AT
Likely Causes
  1. Pressure sensor (transducer) has drifted out of calibration or failed completely
  2. The air dome or air trap at the tub connection point is clogged with detergent residue
  3. Pressure hose has a small crack or pinhole causing the sensor to read inaccurately
  4. Wiring connection at the pressure sensor connector is corroded or loose
How to Fix It
1
Disconnect power to the washer and remove the top panel for access to the pressure sensor
2
Disconnect the pressure hose from the sensor and blow through it to check for blockages
3
Clean the air trap/dome at the tub end of the hose to remove any detergent or debris buildup
4
Inspect the wiring connector at the pressure sensor for corrosion and clean with electrical contact cleaner
5
Replace the pressure sensor if cleaning does not resolve the error
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electrolux pressure sensor/transducer (part #137015400)
Pressure switch hose
Electrical contact cleaner
Related Error Codes
E11E13E21E23E35
Video Guides
Loading video guides…
Search more on YouTube →