e52
Moderate
Electrolux · Washing Machines
Motor Signal Error
Quick Answer
Error code E52 on your Electrolux Washing Machines means: Motor Signal Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Disconnect power and remove the rear access panel to reach the drive motor and motor control board
2
Check the wiring harness connections between the motor and the motor control/inverter board for loose or corroded pins
3
Test the motor windings with a multimeter for resistance (typically 4-7 ohms between phases for a 3-phase motor)
4
Inspect the motor rotor position sensor (Hall sensor) for damage and test its output if possible
5
Replace the drive motor if windings are shorted; replace the motor control board if the motor tests normal
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electrolux drive motor (part #137326000)
Motor control/inverter board (part #137208013)
Motor wiring harness
Related Error Codes