HomeBrandsMaytagDryerse1
M
e1
Moderate
Maytag · Dryers
Thermistor General Fault
Quick Answer
Error code E1 on your Maytag Dryers means: Thermistor General Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MED6230HWMED7230HWMEDC465HWMGD6230HWMGD7230HW
Likely Causes
  1. One of the dryer thermistors has failed with an open or shorted reading
  2. Wiring to a thermistor has broken or developed a loose connection
  3. Control board thermistor input circuit malfunction
  4. Lint contamination around the thermistor causing incorrect temperature readings
How to Fix It
1
Unplug the dryer and refer to the technical data sheet to identify which thermistor is being flagged
2
Test each thermistor with a multimeter; they should read approximately 10,000 ohms at room temperature
3
Inspect the wiring to each thermistor for damage, breaks, or loose connections
4
Clean lint from around each thermistor and its mounting area
5
Replace the specific thermistor that reads outside the expected resistance range
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Thermistor (W10845463)
Wire connectors
Related Error Codes
F1 E1F1 E2F2 E1F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →