HomeBrandsMaytagDryersf4 e1
M
f4 e1
Moderate
Maytag · Dryers
Heater Relay Stuck or Failed
Quick Answer
Error code F4 E1 on your Maytag Dryers means: Heater Relay Stuck or Failed. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MED6230HWMED7230HWMEDC465HWMGD6230HWMGD7230HW
Likely Causes
  1. Heater relay on the main control board has welded shut due to overheating
  2. Control board relay contacts have failed in the open position preventing heat
  3. Loose wiring at the heater circuit terminals
  4. Power surge caused relay circuit damage
How to Fix It
1
Unplug the dryer immediately; a relay stuck closed can cause continuous heating which is a fire risk
2
Access the main control board and look for signs of overheating on or around the heater relay
3
Check the heater wiring connections for loose or burned terminals
4
Test the relay switching function with a multimeter to confirm proper operation
5
Replace the main control board if the heater relay is welded shut or does not switch properly
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (W10174745)
High-limit thermostat (as a safety check)
Related Error Codes
F1 E1F1 E2F2 E1F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →