HomeBrandsMaytagDryersf4 e3
M
f4 e3
Moderate
Maytag · Dryers
Heating Element Open Circuit
Quick Answer
Error code F4 E3 on your Maytag Dryers means: Heating Element Open Circuit. This is usually fixable — see the step-by-step guide below.
Likely Causes
  1. Heating element wire has broken creating an open circuit and no heat output
  2. Loose or corroded wire connector at the heating element terminal
  3. High-limit thermostat has tripped due to overheating and opened the circuit
  4. Thermal fuse has blown interrupting the heater circuit
How to Fix It
1
Unplug the dryer and remove the rear panel or lower front panel to access the heating element
2
Visually inspect the heating element coil for visible breaks or areas where the coil has separated
3
Test the heating element with a multimeter for continuity; no continuity confirms a break
4
Also test the high-limit thermostat and thermal fuse for continuity, as these are in series with the heater
5
Replace the heating element if it is open, and replace any blown thermal fuse or tripped thermostat
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Heating element assembly (W10724237)
Thermal fuse (W10909685)
High-limit thermostat (W10908281)
Related Error Codes
F1 E1F1 E2F2 E1F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →