HomeBrandsMaytagDryersf6 e2
M
f6 e2
Moderate
Maytag · Dryers
User Interface Communication Loss
Quick Answer
Error code F6 E2 on your Maytag Dryers means: User Interface Communication Loss. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
MED6230HWMED7230HWMEDC465HWMGD6230HWMGD7230HW
Likely Causes
  1. Ribbon cable between the user interface and main control has become disconnected or damaged
  2. User interface board communication circuit failure
  3. Main control board UI communication port malfunction
  4. Vibration during operation loosened the ribbon cable connector
How to Fix It
1
Unplug the dryer and access both the user interface board and the main control board
2
Inspect the ribbon cable or wiring harness connecting the two boards for disconnection, tears, or damage
3
Firmly reseat all connectors at both the user interface and main control boards
4
Replace the ribbon cable if it shows visible damage
5
Replace the user interface board if the error continues with a good cable and secure connections
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
User interface board (W11310252)
Ribbon cable
Main control board (W10174745)
Related Error Codes
F1 E1F1 E2F2 E1F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →