1e
Moderate
Samsung · Washing Machines
Water level sensor error or leak detected
Quick Answer
Error code 1E on your Samsung Washing Machines means: Water level sensor error or leak detected. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
WA40A3005AWWF42H5000AWWA44A3205AWWF45K6500AVWF45N5300AVWF45R6100AWWF45R6100ACWF45T6000AWWF45T6000AVWF45B6300ACWF45B6300AWWF45R6300AVWA45T3200AWWF46BG6500AVWF50R8500AVWA50R5400AVWA50R5400AWWA52DG5500AWWA54CG7150ADWA54R7200AVWA54M8750AVWV55M9600AVWA55CG7500AEWV60M9900AVWF46BB6700ADWF53BB8700AVWF53BB8700AT
Likely Causes
How to Fix It
1
Check for visible signs of water leakage on the floor around and under the washer
2
Unplug the washer and inspect the pressure hose from the tub to the water level sensor for kinks or disconnections
3
Check the wire harness between the water level sensor and the main control board
4
Reconnect any loose wires or replace the wire harness if damaged
5
If no wiring problems are found, the water level sensor may need replacement
6
If a leak is found, identify and fix the source before restarting
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water level sensor (pressure transducer)
Pressure hose
Wire harness (if damaged)
Related Error Codes