40 known error codes for this model

1AE Moderate

Complete communication breakdown between multiple circuit boards

1E Moderate

Water level sensor error or leak detected

3E Moderate

Motor error - drive motor or Hall sensor malfunction

4E Easy Fix

Water supply error - washer is not filling with water

4E2 Easy Fix

Hot and cold water supply hoses connected to wrong inlets

5E Easy Fix

Drain error - water is not draining from the tub

9C1 Moderate

Voltage error - electrical supply irregularity detected

9C6 Moderate

Voltage error - irregular power supply detected

AC3 Moderate

Communication error between control module and sub-components

AC6 Moderate

Inverter board communication error affecting motor control

AE Moderate

Communication error between main control board and display board

BE Moderate

Motor TRIAC short or button/sensor error (model-dependent)

CL Easy Fix

Child Lock mode is active (informational code, not an error)

Cb Easy Fix

Calibration mode active (informational code, not an error)

E1 Easy Fix

Water fill timeout error (older models)

E2 Easy Fix

Drain pump failure - not draining (older models)

E4 Easy Fix

Out of balance detected (older models)

E5 Moderate

Water temperature rising or falling too rapidly (older models)

E7 Moderate

Pressure switch error (older models)

E8 Easy Fix

Water temperature too high on low-temperature wash cycles (older models)

E9 Moderate

Water leak detected - water level has dropped unexpectedly (older models)

EA Moderate

Motor tacho generator (Hall sensor) error (older models)

EC Moderate

Thermistor error (older models)

FE Easy Fix

Water flow error - water not entering the washer correctly

HE Moderate

Heating element or heating circuit error

IE Moderate

Water level sensor input error

LE Moderate

Water leak error - moisture detected by leak sensors in the base

OE Moderate

Overflow error - water level too high in the tub

PF Easy Fix

Power failure detected during a cycle

SF Moderate

System error - control board software or hardware fault

Sud Easy Fix

Excessive suds detected in the drum

UE Easy Fix

Unbalanced load detected during spin cycle

Ur Easy Fix

Unbalanced load retry - washer is attempting to rebalance automatically

bE Easy Fix

Stuck button error - a button on the control panel is pressed or stuck

dD Easy Fix

Detergent drawer is not completely closed

dE Easy Fix

Door lock error - door is not properly closed or locked

dE2 Moderate

Door lock error related to on/off switch malfunction

dS Easy Fix

Door is detected as open while the washer is running

tE Moderate

Temperature sensor (thermistor) error

tE4 Moderate

Temperature sensor circuit board error