HomeBrandsWhirlpoolDryersf1 e1
W
f1 e1
Moderate
Whirlpool · Dryers
Main Control Board Failure
Quick Answer
Error code F1 E1 on your Whirlpool Dryers means: Main Control Board Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
WED5000DWWED8127LWWED9620HWWGD5000DWWGD6605MW
Likely Causes
  1. Power surge or voltage spike damaged the main electronic control board
  2. Faulty solder joints or corroded relay contacts on the control board
  3. Moisture infiltration onto the control board from a humid environment
  4. Component failure on the control board such as a blown capacitor or transistor
How to Fix It
1
Unplug the dryer from the electrical outlet and wait 5 minutes before restoring power to attempt a reset
2
Remove the top panel or rear panel to access the main control board
3
Inspect the control board for visible burn marks, swollen capacitors, or damaged relay contacts
4
Check the wiring harness connectors at the control board for secure and corrosion-free connections
5
Replace the main control board if visual inspection reveals damage or the error persists after reset
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (W10174745)
Wiring harness connectors
Related Error Codes
F1 E2F2 E1F2 E5F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →