HomeBrandsWhirlpoolDryersf2 e5
W
f2 e5
Moderate
Whirlpool · Dryers
User Interface Communication Fault
Quick Answer
Error code F2 E5 on your Whirlpool Dryers means: User Interface Communication Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
WED5000DWWED8127LWWED9620HWWGD5000DWWGD6605MW
Likely Causes
  1. Faulty user interface board not sending proper signals
  2. Damaged wiring between the user interface and main control board
  3. Corroded connector pins on the user interface board
  4. Software glitch in the user interface module
How to Fix It
1
Unplug the dryer for 5 minutes to allow a full control reset
2
Access the user interface board and inspect all wiring connections for corrosion or looseness
3
Reseat all connectors at the user interface board and main control board
4
If the error persists after reseating connections, replace the user interface board
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
User interface board (W11310252)
Wiring harness
Related Error Codes
F1 E1F1 E2F2 E1F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →