HomeBrandsWhirlpoolDryersf2 e1
W
f2 e1
Easy Fix
Whirlpool · Dryers
Stuck Button on Control Panel
Quick Answer
Error code F2 E1 on your Whirlpool Dryers means: Stuck Button on Control Panel. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
WED5000DWWED8127LWWED9620HWWGD5000DWWGD6605MW
Likely Causes
  1. A button on the user interface is physically stuck or jammed
  2. Liquid spill or detergent residue beneath the control panel membrane
  3. Damaged membrane switch overlay
  4. Defective user interface control board
How to Fix It
1
Press each button on the control panel to identify any that feel stuck or do not click properly
2
Clean the control panel with a slightly damp cloth to remove any residue around buttons
3
Unplug the dryer for 2 minutes and plug it back in to see if the error clears
4
If a specific button is identified as stuck, replace the control panel overlay or the user interface board
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
User interface board (W11310252)
Control panel overlay
Related Error Codes
F1 E1F1 E2F2 E5F3 E1F3 E2
Video Guides
Loading video guides…
Search more on YouTube →