f3 e1
Moderate
Whirlpool · Dryers
Exhaust Thermistor Failure
Quick Answer
Error code F3 E1 on your Whirlpool Dryers means: Exhaust Thermistor Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Unplug the dryer and locate the exhaust thermistor on or near the blower housing
2
Disconnect the thermistor wires and measure resistance with a multimeter; at room temperature it should read approximately 10,000 ohms
3
Inspect the wiring from the thermistor to the control board for damage or loose connections
4
Clean any lint accumulation around the thermistor and its mounting area
5
Replace the exhaust thermistor if resistance is out of specification
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Exhaust thermistor (W10845463)
Wire connectors
Mounting clip
Related Error Codes