f1 e2
Moderate
Whirlpool · Dryers
Control Communication Error
Quick Answer
Error code F1 E2 on your Whirlpool Dryers means: Control Communication Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Unplug the dryer for 5 minutes and then restore power to reset the communication link
2
Access the main control board and user interface board and check all ribbon cables and connectors
3
Reseat all wiring connectors firmly at both the main control and user interface boards
4
Inspect the ribbon cable for tears, pinching, or corrosion on the connector pins
5
Replace the main control board or user interface board if the communication error continues
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Main control board (W10174745)
User interface board (W11310252)
Ribbon cable
Related Error Codes