HomeBrandsWhirlpoolDryersf4 e3
W
f4 e3
Moderate
Whirlpool · Dryers
Heater Open Circuit
Quick Answer
Error code F4 E3 on your Whirlpool Dryers means: Heater Open Circuit. This is usually fixable — see the step-by-step guide below.
Likely Causes
  1. Heating element wire has broken resulting in an open circuit
  2. Loose or corroded wire terminal at the heating element
  3. High-limit thermostat has tripped and opened the heater circuit
  4. Thermal fuse has blown due to overheating
How to Fix It
1
Unplug the dryer and access the heating element, typically located behind the rear panel or under the drum
2
Visually inspect the heating element coil for breaks or separation
3
Test the heating element with a multimeter for continuity; no continuity means it is broken
4
Test the high-limit thermostat and thermal fuse for continuity as well
5
Replace the heating element if it shows no continuity, and replace any blown thermal fuse or tripped thermostat
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Heating element assembly (W10724237)
Thermal fuse (W10909685)
High-limit thermostat (W10908281)
Related Error Codes
F1 E1F1 E2F2 E1F2 E5F3 E1
Video Guides
Loading video guides…
Search more on YouTube →