f4 e4

Moderate

Whirlpool · Dryers

Heater Shorted Circuit

Quick Answer

Error code F4 E4 on your Whirlpool Dryers means: Heater Shorted Circuit. This is usually fixable — see the step-by-step guide below.

Likely Causes

Heating element coil has sagged and made contact with the heater housing causing a short
Insulation breakdown on the heating element allowing electrical contact with ground
Foreign metallic object in the heater housing creating a short circuit path
Damaged wiring insulation near the heating element connections

How to Fix It

Unplug the dryer immediately and do not operate until repaired

Access and remove the heating element assembly from the dryer

Inspect the heating element coils for any coils that are sagging, touching the housing, or showing signs of arcing

Test between the heating element terminals and the element housing for a ground fault using a multimeter set to ohms

Replace the heating element assembly if any coil is touching the housing or a ground fault is detected

Pro Tip

This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.

Parts You May Need

Heating element assembly (W10724237)

Element insulator brackets

High-limit thermostat (W10908281)

Related Error Codes

Video Guides

Loading video guides…