HomeBrandsWhirlpoolDryersf6 e2
W
f6 e2
Moderate
Whirlpool · Dryers
User Interface Communication Loss
Quick Answer
Error code F6 E2 on your Whirlpool Dryers means: User Interface Communication Loss. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
WED5000DWWED8127LWWED9620HWWGD5000DWWGD6605MW
Likely Causes
  1. Disconnected or damaged ribbon cable between user interface and main control
  2. Defective user interface board
  3. Main control board communication port failure
  4. Intermittent wiring connection due to vibration
How to Fix It
1
Unplug the dryer and access both the user interface board and the main control board
2
Inspect the ribbon cable or wiring harness between the two boards for damage or disconnection
3
Firmly reseat all connectors at both boards
4
If the ribbon cable shows damage, replace it and test the dryer
5
Replace the user interface board if the error continues after verifying all connections
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
User interface board (W11310252)
Ribbon cable
Main control board (W10174745)
Related Error Codes
F1 E1F1 E2F2 E1F2 E5F3 E1
Video Guides
Loading video guides…
Search more on YouTube →